HEXX Fish Finder Mount Instructions
Step 1 – Pilot Holes
Step 1. Drill four (6mm – 1/4″) pilot holes using the base plate as a template.
Step 2 – Drill holes
Step 2. Drill four 10mm (25/64″) holes to mount the base plate.
Step 3 – Insert nuts
Step 3. Push two A nuts into the hex recess in the base plate.
Step 4 – Install base plate
Step 4. Push the backer plate into the four holes with the R facing down and bolt the base plate using the B Philips screws and C nuts.
Step 5 – Attach Platform
Step 5. Attach large platform to the top knuckle using two bolt D’s, add a washer E to each bolt and hand tighten with thumb wheel F.
Step 6 – Attach knuckles
Step 6. Attach the two knuckles (mid sections) together with G and tighten with knob H.
Step 7 – Attach Fish Finder Bracket
Step 7. Attach your fish finder bracket to the platform.
Step 8 – Attach to base plate
Step 8. Attach to the base plate using thumb wheel J.
Step 9 – Complete
Step 9. Your install is now complete!