Kayak Motor Mount

( 13 reviews )


Out of Stock
Part Number: 04-4091-11

Make your kayaking experience even better with the RAILBLAZA Kayak Motor Mount! Whether you need to get to that perfect spot on the lake faster or jus...

Get Notified When In Stock

Kayak Motor Mount


Cruise into your next kayaking adventure with the RAILBLAZA Kayak Motor Mount. Installing your trolling motor is a breeze - it takes just seconds to transform your paddle-only kayak into a boat ready for motor navigation. Plus, customize your setup with rod holders, lights, and camera mounts for any outdoor excursion. Get out on the water in no time with RAILBLAZA!


- Simplest way to attach a trolling motor to your kayak

- Includes all necessary hardware

- Quick transition from paddle only to motor ready

- Able to add RailMount 32-41s to the mount tube for added customization

- This bracket will fit almost all models of kayak, and is suitable for, but not limited to, the following motors

  MinnKota, all transom mount models, MotorGuide, all transom mount models And More...

Parts Included:

1 x Kayak Motor Mount Bracket

2 x RailMount 32-41

2 x Male-to-male adaptors

2 x StarPort HDStainless Steel Hardware



Kayak Motor Mount Overview

MAKE YOUR KAYAKING EXPERIENCE EVEN BETTER - The RAILBLAZA Kayak Motor Mount lets you add a trolling motor to your kayak quickly and easily, transforming it into a motorized vessel that can take you wherever you want to go.

SIMPLE INSTALLATION - No tools required! Just clip the mount onto your kayak and attach your trolling motor. It takes less than thirty seconds to get set up and ready to go.

CUSTOMIZABLE - Add rod holders, lights, or camera mounts with the RailMount 32-41 accessory (sold separately). This fast and simple solution from RAILBLAZA gives you the flexibility to customize your kayaking experience however you want.

EASY TO USE - The RAILBLAZA Kayak Motor Mount is easy to operate, even for beginners. With just a few simple steps, you'll be on your way to an adventure-filled day on the water.

Read More

Kayak Motor Mount

Customer Questions & Answers

Q & A

Will this mount support a 70 lb thrust trolling motor that weighs 30 lbs? Rob Setzer asked on July 2, 2023

Yes, It will

Matt Phillips answered on August 3, 2023 store manager
(0) (0)
Can the mount be placed in the center, I have a Fishcat I9r and would like to mount my motor forward of my seat? Bobby asked on June 29, 2023

You can install it anywhere you would like that make sense for your application. I can't say how the boat will handle mounting it in the middle tho.

Matt Phillips answered on July 7, 2023 store manager
(0) (0)
Hi, I'm looking at purchasing a kayak motor mount for my inflatable kayak. Its a Saturn FK396 fishing kayak. It has D rings for additional seats and aluminum platforms for additional gear but I would like your guys opinion on the best way to mount it? If you could take a look at the kayak and let me know what brackets / mount id need ill place an order today! Cheers, Brandon Brandon Bourque asked on June 6, 2023

You would need 2 of the RibPorts. To install them you would to heat up the RibPort with a heat gun or hair dryer to make it bendable. Then glue them on with 2 part epoxy and let set for at least 2 days.

Matt Phillips answered on June 9, 2023 store manager
(0) (0)
How can this be mounted horizontal? In the video, it appeared the anchors are mounted attached to the side of the kayak wall. I own an inflatable Scout 430, which have flat aluminum benches. I feel like this would work perfectly with my Bixpy, just need a way to mount it to the bench? Peter asked on May 29, 2023

The StarPort HDs would be installed onto your aluminum bench. the extra support for the side of the kayak would not need to be installed for it to work with your boat. We do not have a Scout available to see how the seats are installed. You would have to make sure the seats can handle the torque of the motor.

Matt Phillips answered on May 30, 2023 store manager
(0) (0)
Will your kayak trolling motor mount (item 04-4091-11) attach directly to the universal (Scotty) mounts on my Aquaglide kayak? Thanks. Gordon asked on May 14, 2023

The 2in x 4in mounting plates on your kayak will take StarPort HDs, which you would then mount the trolling motor mount to.

Matt Phillips answered on May 15, 2023 store manager
(0) (0)

Ask a question

Your question will be answered by a store representative or other customers.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Thank you for the question!

Your question has been received and will be answered soon. Please do not submit the same question again.



An error occurred when saving your question. Please report it to the website administrator. Additional information:

Add an answer

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Thank you for the answer!

Your answer has been received and will be published soon. Please do not submit the same answer again.



An error occurred when saving your answer. Please report it to the website administrator. Additional information:


Based on 13 reviews
1-5 of 13 reviews
  1. RO

    Just starting to assemble motor mount. Instructions are fine up to mounting the last fastner to the kayak. The screws etc. are inappropriate for placing the last fastner to a kayak. You can’t get a nut on a screw in a closed body of kayak. I am going to try threaded wood screws to fasten the last piece to the kayak to be able to insert the double male cylinder. Instructions on this last part of the installation are non-existent. Please reach out to me by phone or by e-mail for instructions. Thank you, Oz

  2. ES

    I installed the RAILBLAZA mount on my 13 ft. Ocean Kayak Trident. I really like the ability to remove the mount easily for transport or when I’m not using the trolling motor. The RAILBLAZA motor mount works just as advertised!

    Image #1 from Edward S.
    Image #2 from Edward S.
  3. A

    well made and seems to be very sturdy.

  4. AC

    Excellent product, manufactured with high quality materials, looks and feels very strong, capable to hold my 55lb trolling motor, I am planning to installed in my Brooklyn TK122 Tandem Kayak, comes with everything you need for installation but for this type of kayak I suggest using longer screws to install a plastic resistance plate inside de kayak for strong attachment of the pieces that go attached to the kayak, just for security, I think that for lighter trolling motors like 36lb this won’t be necessary, well just a suggestion.

  5. R