• description
• specifications
• instructions

The RAILBLAZA StarPort is a unique and versatile multifunctional mount, which is used in a huge number of applications and allows users to fit and swap out our full range of RAILBLAZA accessories.

Made from high grade engineering plastics, the StarPort is easy to fit and stylish. It can be surface or recess mounted on power boats, inflatables, sail boats, kayaks, ATVs, garages and many other applications.

To have a loook at our StarPort and SidePort installation video click HERE

Part Numbers

StarPort Pairs

Black: 03-4001-11 StarPort Pair

White: 03-4001-21 StarPort Pair

What You Get:

2 x StarPorts

2 x surface mount adapter rings

2 x weather-tight gasket/covers

4 x 12-gauge 32 mm self-tapping screws

4 x (M6 x 32 mm) bolts, washers & nuts

StarPort Singles

03-4015-11 Single StarPort^TM (Black)

03-4015-21 Single StarPort^TM (White)

What You Get:

1 x StarPort

1 x surface mount adapter rings

1 x weather-tight gasket/cover

2 x 12-gauge 32 mm self-tapping screws

2 x (M6 x 32 mm) bolts, washers & nuts

Dimensional Diagrams (PDF)

Maximum Load Ratings (PDF)

Construction Materials

StarPort AES - (Acrylonitrile Ethylene Styrene)

To have a loook at our StarPort and SidePort installation video click HERE

INSTALLATION: StarPort™

• The StarPort™ can be mounted on the surface using the surface mount collar supplied or it can be recessed into any horizontal or vertical surface.

• Ensure you have adequate clearance behind the surface for screw and/or bolt penetration. and that no cabling, plumbing or rigging will be adversely affected.

• We recommend the use of a silicone-based sealant between the collar and the deck.

SURFACE/RECESS MOUNT

• Drill holes using the template supplied.

1. SURFACE MOUNT: Stack collar, gasket and StarPort™ in place, then fit bolts or screws.
2. RECESS MOUNT: Fit gasket and StarPort™ in place, then fit bolts or screws.

• Tighten nuts or screwheads to a firm tension.