The RAILBLAZA CameraBoom 600 is the perfect way to hold your camera and capture the action.
Whether you are hauling in a record breaking marlin or about to take line honours you can capture the moment from the perfect angle using a RAILBLAZA CameraBoom 600.
At over 700mm long, and fully adjustable with 4 moving joints, this mount is so flexible it has been asked "how did they ever shoot that angle?".
Another fantastic product, the PlatformBoom 150, will allow the mounting of heavier items including sounders and GPS displays, but still give the flexibility of 4 moving joints.
Click HERE to check out our video of our Booms in use.
Any RAILBLAZA BoomMount will fit into any RAILBLAZA StarPort (sold separately).
Part Numbers:
PlatformBoom 150

02-4030-11 PlatformBoom 150
Weight Overall: 330g (0.7lb)
Length: 315mm (12.5")
Camera Screw Thread: 1/4" BSW
Platform Size: 104mm x 104mm (4" x 4")
Device Weight Limit: 2.5kg (6.5lb)
__________________________________________________
CameraBoom 600

02-4029-11: CameraBoom 600
Weight Overall: 480g (1.1lb)
Length: 740mm (29.1")
Camera Screw Thread: 1/4" BSW
Platform Size: 150mm x 70mm (6" x 3")
Device Weight Limit: 0.8kg (1.8lb)
_________________________________________________
Construction Materials:
High grade engineering plastics
Stainless Steel Fasteners
28mm (1 1/8") Anodised Aluminium tube
INSTALLATION:
1. Use any existing StarPort, or attach a new one by following the instructions supplied with the StarPort.
2. The supplied standard camera screw should be sufficient to attach most cameras to the platform. If your camera doesn't have a thread in the bottom, or you are mounting other devices, you will need to mount either by screwing or strapping. Self-adhesive tapes and glues will not adhere to the mounting pad.
3. Once the device is mounted use the supplied hex key to tighten the top knuckle joint to the desired tension. Once tensioned this will only need to be checked periodically.
MAINTENANCE:
The Boom Mount should be washed after each use if it gets in salt water. We recommend that screws are tightened to the required tension on a regular basis.